JMC Emergency Vehicles - Ambulance - Jiangling Motors Official

内容摘要：提供江铃汽车救护车出口版的英文官方产品资料，涵盖车型系列、核心配置与认证声明，作为海外销售的技术底座。

JMC Ambulance Export Series: Complete Vehicle Lineup

Jiangling Motors (JMC) has established itself as a leading manufacturer of emergency medical vehicles in the Asia-Pacific region, leveraging the globally recognized Ford Transit chassis platform. The JMC ambulance export family is engineered to meet the rigorous demands of pre-hospital emergency care across diverse international markets, from tropical Southeast Asia to the extreme climates of the Middle East.

The export product family is categorized into three primary clinical configurations:

1. Type A – Patient Transport Ambulance (BMT)

Built on the JMC Ford Transit short-wheelbase chassis (3,300 mm wheelbase), this unit is designed for non-critical patient transfer and routine medical appointments. It accommodates a single stretcher plus one attendant seat, with a gross vehicle weight rating of 3,500 kg. The patient compartment length is 2,600 mm, providing essential but unobstructed working space.

2. Type B – Emergency Medical Ambulance (BLS/ALS)

The most widely exported configuration, the Type B unit utilizes the long-wheelbase Transit chassis (3,750 mm wheelbase) with a raised roof option. It supports dual stretcher configurations (a primary powered cot plus a secondary folding scoop stretcher), integrated medical gas supply systems (oxygen, nitrous oxide), and a modular cabinetry system manufactured from lightweight, impact-resistant composite panels. Payload capacity reaches 1,200 kg, enabling full ALS (Advanced Life Support) equipment loads.

3. Type C – Negative Pressure Isolation Ambulance (NPI)

Developed in direct response to global infectious disease control protocols, the Type C unit features a dedicated negative pressure isolation chamber. The system maintains a pressure differential of ≥ -30 Pa relative to the driver cabin, with HEPA H14-grade filtration achieving 99.995% particle retention. Air exchange rates are set at 12–15 cycles per hour, ensuring compliance with WHO interim guidance for the transport of highly contagious patients.

Export Specifications & Optional Configurations

JMC recognizes that export markets demand a higher degree of customization than domestic Chinese fleets. The following specifications are standard for all export units, with optional packages listed for regional adaptability.

Standard Export Specification (Base)

• Chassis: Ford Transit V348/V362 platform, 2.0L EcoBoost diesel (103 kW / 355 Nm) or 2.2L Duratorq (114 kW / 385 Nm)
• Transmission: 6-speed manual (standard) / 6-speed automatic (optional)
• Steering: Left-hand drive (LHD) as standard; right-hand drive (RHD) conversion available for UK, Japan, and ASEAN markets
• Electrical System: 12V primary / 24V auxiliary charging circuit for medical equipment
• Medical Power: 1,000 W pure sine wave inverter (220V/50Hz or 110V/60Hz, switchable)
• Lighting: Full LED emergency warning system (front grill, side mirrors, rear deck) with 20+ flash patterns
• Flooring: Seamless, slip-resistant, chemical-resistant reinforced PVC (2.5 mm thickness)

Regional Adaptation Options (Product Configuration Examples)

For Gulf Cooperation Council (GCC) markets, JMC ambulances are fitted with a high-capacity dual-compressor air conditioning system (18,000 BTU/h) and an enhanced cooling water pump (upgraded to 120 L/min flow rate), specifically calibrated to maintain cabin temperatures below 24°C even when ambient temperatures exceed 50°C. The cooling system is independently zoned for driver and patient compartments, preventing cross-contamination of airflow.

For European Union markets, optional upgrades include a rear air suspension system (electronically controlled, lowering the loading height to 520 mm for easier stretcher loading) and side-impact protection bars compliant with ECE R29.02 cabin strength requirements.

For tropical/sub-Saharan African markets, the standard package adds a high-efficiency particulate air (HEPA) recirculation unit with anti-mold coating, plus a heavy-duty battery pack (2 × 100 Ah AGM) to support extended idling periods without engine load.

Certifications & Compliance Declarations

JMC provides comprehensive certification documentation with every export ambulance unit. The following documents are supplied as standard with each vehicle shipment:

For markets requiring additional regional homologation (e.g., DOT/NHTSA for North America or ADR for Australia), JMC works with certified third-party testing agencies such as TÜV SÜD and SGS to generate supplementary test reports. These reports typically include dynamic stability testing (ISO 8987), braking performance (ECE R13), and fire resistance testing of interior materials (ISO 3795).

Documentation Package Includes:

• Certificate of Origin (CCPIT-issued)
• Commercial Invoice & Packing List
• Bill of Lading (negotiable)
• Factory Test Report (pre-shipment inspection, signed by JMC QA engineers)
• Warranty Registration Form (2-year/100,000 km base warranty, extendable to 5 years for fleet operators)

All JMC export ambulances are manufactured in compliance with GB/T 28956-2012 (Chinese national standard for ambulance construction) as a baseline, with stricter international standards applied where regional regulations demand it. The production facility operates under ISO 9001:2015 and IATF 16949 quality management systems.

For detailed technical drawings, 3D CAD models, or a customized specification sheet tailored to your specific market requirements, our engineering team provides a 48-hour turnaround on technical queries. For procurement inquiries, including fleet pricing, delivery schedules (typically 45–60 days FOB Shanghai), and after-sales support contracts, please contact our dedicated export division.

Contact:

• Export Sales & Technical Support: 400-600-3689
• Authorized Export Partner: Hubei RuiTu Technology Co., Ltd. (湖北锐途科技有限公司), located at Xingguang 1st Road, Zengdu District, Suizhou City, Hubei Province, China.

Note: All specifications are subject to continuous product improvement. JMC reserves the right to modify configurations without prior notice. Final specifications are confirmed at the time of contract signing.

企业信息

公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com