Foton Toano Ambulance Specifications - Foton Global

内容摘要：福田全球官网发布的Toano右驾救护车规格，包括尺寸、动力、医疗舱配置等，供国际客户参考。

Foton Toano Right-Hand Drive Ambulance: Complete Technical Specifications

For international markets operating left-hand traffic systems, the Foton Toano Right-Hand Drive (RHD) Ambulance represents a meticulously engineered emergency medical solution. Developed on Foton’s proven light commercial vehicle platform, this ambulance combines robust mechanical reliability with a purpose-built medical module, catering to diverse pre-hospital care requirements across Southeast Asia, Oceania, the UK, and Southern Africa. Below is the comprehensive specification breakdown structured for procurement officers, fleet managers, and emergency medical service (EMS) directors.

Engine and Drivetrain

The Foton Toano RHD ambulance is powered by a Cummins-sourced 2.8-liter ISF turbo-diesel engine, a powerplant renowned in the commercial vehicle sector for its durability and serviceability. This engine delivers a peak power output of 150 horsepower (110 kW) at 3,200 rpm, ensuring adequate velocity for urgent response scenarios even when the vehicle is operating at full gross vehicle weight (GVW).

More critical for emergency acceleration and hill climbing is the torque curve. The ISF engine generates a maximum torque of 360 Nm, available from a low 1,400 rpm up to 2,800 rpm. This flat torque band allows the ambulance to maintain cruising speeds on highways and navigate steep urban gradients without excessive gear shifting, which is a decisive factor in reducing response times.

The engine is mated to either a 6-speed manual transmission (standard) or an optional 6-speed automatic gearbox (specifically tuned for emergency driving patterns). Power is routed to the rear wheels via a single-speed hypoid axle with a ratio suited for both urban stop-start traffic and sustained high-speed runs. The drivetrain includes a 90-liter fuel tank, providing an approximate operational range of 700 kilometers under mixed conditions, reducing the frequency of refueling during prolonged multi-patient transports.

Dimensions and Weight

Precise dimensions are critical for maneuverability in congested city centers and for ensuring the vehicle fits standard ambulance bays. The Foton Toano RHD ambulance is offered in a single, optimized wheelbase configuration for emergency response:

The 1,650 kg payload is a standout figure in this class, allowing for the installation of heavy advanced life support (ALS) equipment—such as powered stretchers, ventilators, and defibrillators—without compromising the vehicle’s structural integrity or ride dynamics. The interior headroom in the patient compartment is a full 1,880 mm, allowing paramedics to attend to patients while standing upright.

Ambulance Module

The rear module is manufactured using a sandwich composite construction—a non-corrosive, thermally insulated structure comprising a GRP outer skin, a structural aluminum frame, and a high-density polyurethane foam core. This build methodology ensures the module is both lightweight and capable of withstanding the torsional stresses of heavy braking and emergency maneuvers.

Available with various medical configurations, the Foton Toano can be customized with advanced life support systems, meeting international ambulance standards. The standard medical bay layout includes:

• Patient Cot System: A hydraulic multi-position stretcher capable of supporting loads up to 250 kg, secured via a three-point auto-lock floor mechanism. The loading height is optimized at 720 mm for ergonomic crew operation.
• Seating: A forward-facing, foldable attendant seat with a three-point harness, compliant with ECE R17 safety standards. A side-facing crew bench with integrated oxygen cylinder storage (capacity for two 10-liter cylinders) is standard.
• Electrical System: The module is equipped with a 2,000W pure sine wave inverter, powered by a dedicated auxiliary battery bank (2 x 100Ah deep-cycle gel batteries). This system runs all medical devices and interior/exterior lighting independently of the chassis alternator, ensuring engine start capability is never compromised. Electrical outlets include four 230V sockets and two 12V ports.
• Climate Control: A dedicated rear air-conditioning unit provides independent temperature regulation, maintaining a stable environment between 22°C and 26°C for medication storage and patient comfort. A separate heating circuit is integrated into the floor ducting system.
• Interior Finishes: All cabinetry is constructed from lightweight, impact-resistant ABS plastic with seamless, rounded corners to facilitate rapid decontamination. The floor is a seamless, slip-resistant, welded PVC membrane with cove-formed edges to prevent fluid ingress.

Safety and Compliance

Compliance with international regulatory frameworks is non-negotiable for emergency vehicles. The Foton Toano RHD ambulance is engineered to meet ECE (Economic Commission for Europe) regulations for both chassis and body conversions.

• Chassis Safety Systems: The vehicle features dual front airbags, ABS (Anti-lock Braking System) with EBD (Electronic Brakeforce Distribution), and ESP (Electronic Stability Program) calibrated specifically for the higher center of gravity of an ambulance conversion. Hill-start assist is standard, a critical feature for operations in hilly terrains like Hong Kong or Wellington.
• Patient & Crew Safety: The ambulance module is tested to withstand a 10g frontal impact deceleration without structural failure of the patient cot anchor points. This exceeds the baseline requirements of ECE R32 for rear-seat strength, ensuring the stretcher remains secure in a collision.
• Emergency Lighting: The exterior warning system consists of a low-profile LED light bar on the front roof and integrated LED modules in the rear and side panels. All lighting conforms to ECE R65 regarding photometric performance, ensuring visibility from 360 degrees.
• Certification: The complete vehicle, including the ambulance conversion, is certified under ECE R107 (for category M2/M3 vehicles) and the base chassis is compliant with Euro 6d emission standards. For markets requiring specific national type approval, Foton Global provides full documentation packages to facilitate local registration, including CAD drawings and load distribution calculations.

For procurement teams requiring technical clarification, integration support, or regional pricing, authorized conversion partners such as 湖北锐途科技有限公司 (located at 湖北省随州市曾都区星光一路) offer direct factory-level consultation. They can be reached at 4006003689 for detailed specification sheets regarding the Foton Toano RHD ambulance or alternative right-hand drive configurations based on Foton chassis platforms. Their engineering team assists with customizing the medical module to align with local EMS protocols, ensuring the vehicle meets both regulatory mandates and operational realities upon delivery.

企业信息

公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com