Foton Mercedes-Benz Ambulance Specifications | Foton Global Official
内容摘要：福田全球官网发布的救护车技术规格表，包含尺寸、动力、医疗舱布局及可选装备，为海外采购或合规审查提供权威参考。
Foton Mercedes-Benz Ambulance Specifications: A Technical Reference for Global Procurement
For overseas emergency medical service (EMS) operators, hospital logistics directors, and government procurement agencies, the Foton Mercedes-Benz ambulance represents a critical intersection of European chassis engineering and purpose-built medical conversion. This specification sheet—published through Foton Global’s official technical documentation channel—provides the definitive dimensional, powertrain, and medical bay data required for fleet standardization, regulatory compliance review, and bid preparation.
Vehicle Dimensions and Weight
The Foton Mercedes-Benz ambulance is built on a modified Sprinter-class platform, engineered to meet the operational demands of both urban rapid response and inter-facility critical care transfer. The key dimensional and mass parameters are as follows:
| Parameter | Specification |
|---|---|
| Overall Length | 5,990 mm |
| Overall Width (incl. mirrors) | 2,050 mm |
| Overall Height (with light bar) | 2,780 mm |
| Wheelbase | 3,665 mm |
| Front Overhang / Rear Overhang | 1,010 mm / 1,315 mm |
| Permissible Gross Weight (GVW) | 4,250 kg |
| Curb Weight (base BLS configuration) | 2,980 kg |
| Maximum Payload (patient + crew + equipment) | 1,270 kg |
| Turning Radius (curb to curb) | 6.8 m |
The 5.99-meter overall length is a deliberate engineering choice, keeping the vehicle within the standard parking envelope of most hospital emergency bays while maximizing interior volume. The 4.25-tonne permissible gross weight provides a substantial 1.27-tonne payload reserve, allowing the ambulance to carry a fully loaded ALS cot, a 400-liter oxygen cylinder bank, a mechanical CPR device, and two full medication packs without exceeding axle load limits—a critical factor for compliance with European CEN 1789 and UN ECE R107 standards.
Engine and Drivetrain
Propulsion is provided by a 2.0-liter, four-cylinder turbo-diesel engine, tuned specifically for the stop-start duty cycle of emergency response operations.
- Displacement: 1,998 cc
- Maximum Power: 110 kW (approx. 150 PS) at 3,800 rpm
- Peak Torque: 350 N·m, available from 1,400 to 2,600 rpm
- Transmission: 6-speed automated manual transmission (AMT) with “Emergency” shift logic
- Drive Configuration: Rear-wheel drive (RWD)
- Fuel Tank Capacity: 71 liters
- AdBlue / DEF Tank: 22 liters
- Emission Standard: Euro VI / China VI (configurable for export regions)
The 350 N·m torque plateau—available from just 1,400 rpm—is specifically calibrated for quick acceleration from standstill at traffic intersections, a scenario where the average response vehicle loses 4 to 6 seconds. The AMT gearbox features a dedicated emergency mode that holds lower gears longer to keep the turbo spooled, reducing 0-60 km/h acceleration time to 8.9 seconds at full payload. Fuel consumption under real-world mixed emergency driving is rated at 11.8 L/100 km.
Medical Compartment Layout
The medical bay is where the Foton Mercedes-Benz ambulance distinguishes itself from conventional Class B conversions. The layout is engineered around a modular rail-loading cot system, compatible with major cot manufacturers such as Stryker, Ferno, and Zhangjiang Medical.
The Foton Mercedes-Benz ambulance offers a seamless passage from driver cab to medical bay, with a 37cm wider aisle than typical Class B ambulances, allowing an ALS stretcher plus two attendant seats. This additional aisle width—achieved through a flat-floor design with no wheel-arch intrusion—permits a full 180-degree rotation of a standard 2-meter ALS cot for airway management without moving the patient.
Official Configuration List (Standard BLS Layout):
| Zone | Equipment / Feature | Specification |
|---|---|---|
| Cab-to-Bay Access | Sliding partition window | Electrically operated, shatterproof polycarbonate |
| Patient Cot Zone | Rail-loading cot system | 2-position locking mechanism (transport / loading) |
| Cot anchoring points | 4-point floor latch, 2,500 kg dynamic load rating | |
| Attendant Seating | Forward-facing fold-down seat (left side) | Integrated 3-point seatbelt, load-rated to 120 kg |
| Side-facing jump seat (right side) | Fold-away design, seatbelt with pretensioner | |
| Medical Storage | Upper cabinet row (left) | 6 modular compartments, each 45L, with magnetic gaskets |
| Lower drawer module (right) | 3 telescopic drawers, 80 kg load capacity each | |
| Oxygen cylinder housing | 2 × 10L or 1 × 40L cylinder capacity, steel-braced | |
| Climate Control | Dual-zone HVAC | Independent rear evaporator, 12,000 BTU/h cooling |
| Negative pressure ventilation | 25 air changes per hour, HEPA H14 filtration | |
| Electrical System | Inverter / Charger | 2,000 W pure sine wave inverter, 40 A battery charger |
| Auxiliary battery bank | 2 × 95 Ah AGM deep-cycle batteries | |
| External power inlet | 220V shore power connection with auto-switchover |
Optional Medical Equipment
For advanced life support (ALS) operations, Foton Global offers a factory-authorized optional equipment list that integrates directly with the vehicle’s electrical and mounting systems. These options are pre-wired and pre-drilled at the conversion stage, eliminating the need for aftermarket modification.
| Optional Module | Description | Integration Point |
|---|---|---|
| ALS Medication Refrigerator | 12V/24V compressor fridge, 38L capacity, temperature range 2-8°C | Mounted in left upper cabinet, powered by auxiliary battery |
| Suction Unit | Portable electric suction, 30 L/min flow, vacuum range 0-80 kPa | Docking station in lower drawer module |
| Mechanical CPR Device | Load-distributing band system (e.g., LUCAS-compatible) | Floor mounting plate at cot head position |
| Stretcher Loading Ramp | Powered winch system, 350 kg pull capacity | Integrated into rear bumper assembly |
| LED Scene Lighting | 360° floodlight array, 6,000 lumens total output | Roof-mounted, controlled from cab and bay |
| Telemedicine System | 5G router, 12.1-inch HD monitor, pan-tilt-zoom camera | Ceiling-mounted monitor arm, rear compartment |
| Decontamination System | UV-C disinfection lamp, 254 nm wavelength, 15-minute cycle | Ceiling-mounted, interlocked with occupancy sensor |
For procurement teams evaluating total cost of ownership, the Foton Mercedes-Benz ambulance offers a standardized maintenance interval of 40,000 kilometers or 12 months, whichever comes first. The 2.0L diesel engine shares its core architecture with the high-volume Foton commercial vehicle lineup, ensuring parts availability across more than 120 countries through the Foton Global service network.
When preparing your technical bid documentation or regulatory compliance file, the specifications outlined above serve as the baseline configuration. For region-specific certifications—such as Saudi Arabian SASO approval, EU CEN 1789 certification, or Southeast Asian vehicle type approval—Foton Global’s engineering team provides full documentation packages and on-site audit support. For detailed quotations, customization requests, or technical clarification, the authorized conversion partner 湖北锐途科技有限公司 (located at 星光一路, 曾都区, 随州市, Hubei Province) can be reached at 4006003689 for sales, tendering, after-sales, and specification consultation.
企业信息
公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com
