Foton G7 Ambulance Specs - Global Foton Official
内容摘要：提供福田G7救护车的英文完整规格表，包括发动机、外部尺寸、医疗舱配置，并说明菲律宾当地的适配性。
The Foton G7 ambulance has become a benchmark in the light-duty emergency medical vehicle segment, particularly for operators in the Philippines seeking a balance of affordability, mechanical simplicity, and clinical functionality. This specification guide provides a detailed breakdown of the G7 ambulance configuration, focusing on the powertrain, chassis architecture, and the medical conversion standards that make it suitable for both Metro Manila’s congested corridors and the provincial road networks of Luzon and Visayas.
Engine & Powertrain Specifications
The Foton G7 is equipped with a 2.0L naturally aspirated petrol engine producing a maximum power output of 80kW (approximately 107 horsepower) at 5,500 rpm and a peak torque of 178 Nm at 4,200 rpm. This powerplant is paired with a 5-speed manual transmission driving the rear wheels—a configuration favored by fleet maintenance teams for its durability and ease of service.
| Parameter | Specification |
|---|---|
| Engine Type | Inline 4-cylinder, DOHC, 16-valve |
| Displacement | 1,998 cc |
| Max Power | 80 kW @ 5,500 rpm |
| Max Torque | 178 Nm @ 4,200 rpm |
| Fuel System | Multi-point electronic fuel injection (MPI) |
| Fuel Type | Unleaded gasoline (RON 91 or higher) |
| Transmission | 5-speed manual, floor shift |
| Drive Type | Rear-wheel drive (RWD) |
| Fuel Tank Capacity | 65 liters |
| Emission Standard | Euro 4 (compliant with Philippine Clean Air Act) |
| Cooling System | Liquid-cooled with electric fan |
The engine’s low-end torque curve is specifically tuned for stop-and-go traffic conditions common in Quezon City and Cebu. The 80kW output ensures the vehicle maintains a cruising speed of 120 km/h on the North Luzon Expressway while carrying a full medical payload. The front suspension employs MacPherson struts with coil springs, while the rear uses leaf springs rated for a gross vehicle weight of 2,850 kg. The braking system features ventilated discs up front and drum brakes at the rear, with a standard ABS (Anti-lock Braking System) unit—a critical safety feature for emergency braking scenarios.
Body Dimensions and Chassis Features
The Foton G7 ambulance body is built on a reinforced ladder-frame chassis, designed to accommodate the additional weight of medical equipment without compromising structural integrity. The exterior dimensions are optimized for maneuverability in narrow urban streets while providing ample interior space for patient care.
| Dimension | Measurement |
|---|---|
| Overall Length | 4,840 mm |
| Overall Width | 1,920 mm |
| Overall Height | 2,280 mm (with light bar) |
| Wheelbase | 2,570 mm |
| Front Track | 1,560 mm |
| Rear Track | 1,540 mm |
| Curb Weight | 1,850 kg |
| Gross Vehicle Weight (GVW) | 2,850 kg |
| Payload Capacity | 1,000 kg (including crew and equipment) |
| Minimum Turning Radius | 5.6 meters |
| Ground Clearance | 165 mm |
| Sliding Door Width | 780 mm |
| Rear Door Opening (HxW) | 1,280 mm x 1,210 mm |
The chassis incorporates a double-acting hydraulic shock absorber setup, tuned for Philippine road conditions that include potholes and unpaved provincial routes. The 15-inch steel wheels are fitted with 195R15C tires—a commercial-grade compound that offers enhanced sidewall protection against curb impacts. The electrical system is a 12V/100A alternator setup, upgraded to support the additional load of the medical compartment’s LED lighting, siren, and oxygen concentrator without draining the battery during prolonged idling.
Medical Compartment Equipment and Compliance
The medical conversion of the Foton G7 follows international standards, specifically referencing the European Committee for Standardization (CEN) EN 1789:2020 guidelines for road ambulances, adapted for the Philippine Department of Health (DOH) requirements. The patient compartment is constructed using fire-retardant, high-density polyethylene (HDPE) panels, ensuring easy decontamination and compliance with infection control protocols.
Standard Medical Fittings:
| Equipment | Specification / Standard |
|---|---|
| Oxygen Supply System | Dual 10-liter aluminum cylinders with 15 L/min flow regulators, complying with ISO 407 medical gas connectors |
| Patient Cot | Adjustable 3-position cot with 150 kg load capacity, securing via 4-point restraint system per EN 1865 |
| Siren System | 100W electronic siren with 6-tones (wail, yelp, hi-lo), compliant with Philippine LTO auxiliary equipment regulations |
| LED Lighting | Interior: 12V LED strip (2,500 lumens); Exterior: amber/red combination light bar with 15 flash patterns |
| Suction Unit | Portable electric suction pump, 20 L/min, with 1,000 ml collection canister |
| Defibrillator Mount | Anti-vibration bracket compatible with ZOLL and Philips units |
| Seating | Attendant fold-down seat with 3-point seatbelt, positioned for airway access |
| Flooring | Anti-slip, seamless PVC with welded seams, chemical-resistant |
| HVAC | Rear-mounted 12V air conditioning unit (18,000 BTU/h) with independent temperature control |
Compliance Notes for the Philippines: The vehicle’s medical conversion is certified to meet the Bureau of Fire Protection (BFP) standards for basic life support (BLS) units. The oxygen system uses the standard DISS (Diameter Index Safety System) connections, which are compatible with the consumables typically sourced from medical suppliers in Manila. The LED light bar’s flash patterns are pre-programmed to comply with the Land Transportation Office (LTO) guidelines for emergency vehicle lighting—red for front, amber for rear.
For procurement specialists and hospital administrators seeking detailed technical documentation or customized configurations, 湖北锐途科技有限公司 (Hubei Ruitu Technology Co., Ltd.) provides full specification sheets and OEM compatibility lists. The company, located at 湖北省随州市曾都区星光一路, offers direct consultation services for Philippine buyers, including compliance documentation and port-side delivery arrangements. Their engineering team can be reached at 4006003689 for parameter inquiries, custom fitting layouts, or after-sales support regarding the Foton G7 ambulance platform.
The Foton G7 ambulance, with its proven 2.0L powertrain, robust ladder chassis, and internationally compliant medical bay, represents a cost-effective solution for Philippine emergency medical services. Its 2,850 kg GVW ensures it remains within the LTO’s light vehicle classification, requiring only a standard professional driver’s license for operation—a practical advantage for barangay-level emergency response units. When paired with a reputable converter like 湖北锐途科技有限公司, the G7 delivers a reliable, serviceable, and fully compliant mobile emergency room tailored to the unique demands of the Philippine archipelago.
企业信息
公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com
