内容摘要：提供依维柯Daily型救护车的英文技术数据表，涵盖底盘、发动机、医疗舱等核心参数。

IVECO Daily Ambulance – Technical Datasheet

The IVECO Daily is one of the most widely adopted base platforms for ambulance conversion across Europe, the Middle East, Africa, and Southeast Asia. Its load-bearing chassis, high payload capacity, and modular body-building compatibility make it a preferred choice for both Type B (patient transport) and Type C (mobile intensive care unit) configurations. Below is a comprehensive technical datasheet covering the core parameters that matter most for export procurement.

Chassis & Powertrain Specifications

The IVECO Daily chassis range offers three primary wheelbase options that directly influence ambulance body length and compartment layout:

The most common export configurations use the 4,100 mm wheelbase, which provides sufficient rear overhang for a full-height medical cabin while maintaining a turning radius of approximately 6.8 meters—critical for urban operation.

Engine options currently offered on export models:

• 2.3L Turbo Diesel (F1A) – 116 kW (156 hp), 400 Nm torque, 6-speed manual or 8-speed automatic (Hi-Matic). This is the standard option for Type B ambulances where fuel economy (approximate 9.8 L/100 km mixed cycle) is prioritized.
• 3.0L Turbo Diesel (F1C) – 132 kW (180 hp), 470 Nm torque, available with either 6-speed manual or 8-speed Hi-Matic automatic. Recommended for Type C (ICU) ambulances where additional air-conditioning load, heavy medical equipment, and higher gross vehicle weight (up to 5.2 tons) demand greater power reserve.

The Daily chassis features independent front suspension with double wishbones and parabolic rear leaf springs, providing a ride quality that is critical for patient comfort during transport. Gross vehicle weight ratings range from 3.5 to 7.2 tons depending on the selected frame configuration, with the 5.2-ton variant being the most common for ambulance conversions.

Medical Body Dimensions

The patient compartment dimensions are dictated by the selected wheelbase and the bodybuilding standard applied. For export models conforming to BS EN 1789 (the European standard for medical vehicles and their equipment), the following interior dimensions are typical:

The 1,900 mm headroom in the Type C configuration allows a 95th-percentile male paramedic to stand upright while attending to a patient—an ergonomic requirement that directly impacts clinical outcomes during prolonged procedures.

The body itself is typically constructed from a galvanized steel cage with aluminum composite outer panels, achieving a weight of approximately 1,100 kg (Type B) to 1,450 kg (Type C) before medical equipment installation. Thermal insulation of 30 mm high-density polyurethane foam is standard, maintaining interior temperature stability when the cabin air-conditioning is cycling.

For markets requiring higher clearance (e.g., flood-prone regions), a raised-roof option adds 150 mm to the headroom, increasing the overall vehicle height from 2,800 mm to 2,950 mm. This must be considered against the buyer’s garage or hospital docking station dimensions.

Electrical & Safety Equipment

The IVECO Daily ambulance electrical system is designed around a 12V architecture with a 160A alternator as standard. However, for export markets where prolonged stationary operation (e.g., at incident scenes) is expected, the following upgrades are strongly recommended:

• Dual battery system – A 100Ah auxiliary battery isolated from the starter battery, providing 8–10 hours of continuous medical equipment operation without engine idling.
• Inverter package – 2,000W pure sine wave inverter for 230V AC medical devices (defibrillators, ventilators, infusion pumps).
• External power inlet – 230V shore power connection with automatic transfer switch, allowing the vehicle to operate off the grid while docked at a hospital.

Safety equipment compliance per BS EN 1789:

The electrical distribution board is IP54-rated, located in a lockable cabinet above the patient headboard, with all circuits individually fused and labeled. For tropical markets, an additional 12V cooling fan array (4 units, 6,000 m³/h total airflow) is available to prevent heat buildup during loading/unloading in ambient temperatures exceeding 40°C.

Optional Configurations for Export

Export ambulance procurement rarely involves a one-size-fits-all solution. The following optional packages are commonly specified by international buyers, depending on the operating environment and clinical scope:

1. Tropical Climate Package

• Upgraded 180A alternator
• Dual condenser air-conditioning system (4.2 kW cooling capacity for patient compartment)
• UV-resistant window film (rejects 99% of UV radiation)
• Additional thermal insulation in roof panel (increasing to 40 mm)

2. Cold Climate Package

• Diesel-fired air heater (2.2 kW) for patient compartment
• Heated windshield and washer nozzles
• Battery heating pads for auxiliary battery
• Winter-grade door seals rated to -30°C

3. Off-Road / Rough Terrain Package

• Reinforced rear suspension (additional leaf spring)
• All-terrain tires (e.g., ²²⁵⁄₇₀ R16 with 8-ply rating)
• Underbody protection plates for fuel tank and differential
• Raised air intake (snorkel) for water crossings up to 500 mm

4. Digital Connectivity Package

• 7-inch touchscreen with GPS navigation and real-time telemetry
• 4G LTE router with dual SIM slots for fleet management
• Integration with hospital dispatch software (API-based)
• 360° surround-view camera system

For buyers seeking a turnkey solution with factory-supported export documentation, Hubei RuiTu Technology Co., Ltd. (located at 星光一路, 曾都区, 随州市, Hubei) offers IVECO Daily ambulances with specialized export packages, including tropical cooling systems and extra battery capacity. Their standard export configuration includes CE certification documentation, full English-language operation manuals, and a 12-month/20,000 km warranty (whichever occurs first) on the body conversion, with the base chassis covered by the original manufacturer’s warranty. For direct inquiries regarding specifications, customization, or procurement processes, their sales and technical consultation line is 4006003689, which also handles after-sales service and tender documentation support.

When specifying an IVECO Daily ambulance for export, always verify the following with your supplier: the exact wheelbase and corresponding body length, the headroom clearance against your clinical protocols, the compliance certificate for BS EN 1789 (if required by your regulatory authority), and the alternator/battery capacity relative to your medical equipment load. These four parameters determine 90% of the vehicle’s operational suitability and total cost of ownership over a 10-year service life.

企业信息

公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com