IVECO Daily 4x4 Ambulance Specification Sheet

内容摘要：提供IVECO越野救护车的英文版规格参数，涵盖底盘、动力和医疗改装要求，匹配国际救护车标准

IVECO Daily 4x4 Ambulance: Complete Technical Specification

When the mission demands all-terrain reliability combined with clinical-grade medical capability, the IVECO Daily 4x4 stands as a benchmark platform for off-road emergency response. This specification sheet provides a comprehensive breakdown of the chassis, powertrain, body construction, and regulatory compliance parameters that define this purpose-built ambulance.

Chassis & Powertrain

Frame & Suspension The IVECO Daily 4x4 utilizes a heavy-duty C-section ladder frame constructed from high-strength steel, with a maximum gross vehicle weight (GVW) rating of 7,200 kg. The front axle is a rigid beam design with parabolic leaf springs and hydraulic shock absorbers, providing 220 mm of wheel articulation. The rear axle features a hypoid differential with a locking function, paired with multi-leaf springs rated for constant heavy loading. Ground clearance measures 285 mm under the differentials, with approach and departure angles of 42° and 34° respectively.

Engine Specifications The standard power unit is the FPT Industrial F1C 3.0-liter turbocharged diesel engine, delivering:

• Maximum Power: 180 hp (132 kW) at 3,500 rpm
• Peak Torque: 430 Nm at 1,400–2,800 rpm
• Displacement: 2,998 cc
• Fuel System: Common-rail direct injection with 1,800 bar injection pressure
• Emissions: Euro VI-compliant with SCR (Selective Catalytic Reduction) and DPF (Diesel Particulate Filter)

An optional Hi-Matic 8-speed automatic transmission is available, while the standard fitment is a 6-speed ZF manual gearbox with synchronized gears on all forward ratios.

4WD System with Low-Range Gearing The permanent all-wheel-drive system employs a Torsen center differential with a 40:60 front-to-rear torque split. A two-speed transfer case provides:

• High Range: 1.0:1 ratio for highway operation
• Low Range: 2.48:1 ratio for technical off-road terrain
• Hill Descent Control: Electronically managed at 3–9 km/h in low range
• Locking Differentials: Pneumatically engaged rear diff lock, optional front diff lock

The system operates through an electro-hydraulic shift mechanism, allowing engagement of low range while stationary or at speeds below 5 km/h. The braking system comprises ventilated discs on all four wheels, with ABS, EBD, and ESP as standard safety features.

Fuel & Range The standard fuel tank capacity is 100 liters, with an optional 160-liter auxiliary tank. At a combined consumption rate of 11.8 L/100 km, the vehicle offers a maximum operating range of 1,350 kilometers—critical for long-range rural and cross-border missions.

Ambulance Body & Equipment

Patient Compartment Construction The rear cabin is constructed from a sandwich panel system featuring:

• Outer Skin: 1.5 mm aluminum alloy sheet (5052 grade)
• Core: 30 mm closed-cell PVC foam for thermal insulation
• Inner Liner: 1.2 mm medical-grade stainless steel (304L) with anti-bacterial coating
• Floor: 3 mm diamond-plate aluminum with non-slip PVC covering

The compartment dimensions measure 3,450 mm (length) × 1,850 mm (width) × 1,900 mm (height), providing a usable volume of 12.1 cubic meters. This accommodates two stretcher systems with full access for attending medical personnel.

Medical Systems Installation The electrical system operates on a 12V/24V dual-circuit architecture with a 2,800W alternator and a 200Ah auxiliary battery bank. A 3,000W pure sine wave inverter supplies 230V AC power to medical outlets. Key installed equipment includes:

• Patient Transport Ventilator: Operating pressure range 5–60 cmH₂O
• Suction Unit: Vacuum capacity of 25 L/min at 500 mmHg
• Oxygen Supply: Dual 10-liter cylinders with 400 L/min flow regulator
• Defibrillator Mount: Shock-proof mounting bracket with quick-release mechanism
• Stretcher System: Powered height-adjustable cot with 300 kg load capacity

Environmental Control A roof-mounted HVAC unit delivers 12,000 kcal/h cooling capacity and 8,000 kcal/h heating, maintaining a cabin temperature of 22°C ± 2°C across ambient conditions from -30°C to +50°C. The system features separate zones for driver and patient compartments, with HEPA filtration rated at 99.97% efficiency for 0.3-micron particles.

Regulatory Compliance

The IVECO Daily 4x4 ambulance base vehicle is fully type-approved under EU Regulation (EU) ²⁰¹⁸⁄₁₂₄₅, covering essential vehicle systems including braking performance, steering geometry, and electromagnetic compatibility. However, the complete ambulance conversion must also satisfy the specific requirements of the European Committee for Standardization (CEN) technical specification CEN/TS 1789:2023 for medical vehicles and their equipment.

Medical Cabin Sealing & Bio-Containment In accordance with EU Regulation ²⁰¹⁸⁄₁₂₃₄, Annex III Section 2.4 regarding the transport of biological hazards, the patient compartment is designed as a negative-pressure isolation unit. The cabin maintains a differential pressure of -15 Pa relative to the driver cabin, achieved through a dual-stage HEPA filtration exhaust system. The sealing system employs continuous EPDM gaskets on all doors and access panels, with a verified air leakage rate of less than 0.5% of total cabin volume per hour at 100 Pa pressure differential.

Electrical Safety Compliance Electrical installation follows the harmonized standard EN 60601-1 for medical electrical equipment. Key compliance features include:

• Earth Leakage Current: ≤ 0.5 mA under normal operation
• Protective Earth Resistance: ≤ 0.1 Ω
• Insulation Withstand: 4,000 V AC for 1 minute between live parts and chassis
• IP Rating: All external medical outlets rated IP65 against dust and water ingress

Emergency Lighting & Signage The ambulance conforms to ECE R65 for flashing warning lamps and ECE R28 for audible warning devices. The light bar produces 32,000 lumens with a flash frequency of 2.5 Hz, and the siren system operates at 118 dB(A) measured at 3 meters.

Manufacturing & Quality Assurance The conversion process follows ISO 9001:2026 quality management protocols, with each unit undergoing a 72-hour continuous electrical load test and a 50-kilometer rough-terrain validation drive before delivery. The complete vehicle is documented with a Declaration of Conformity referencing all applicable EU directives.

For procurement specifications, technical drawings, or compliance documentation in PDF format, the conversion team at 湖北锐途科技有限公司 (located at 湖北省随州市曾都区星光一路) can provide complete engineering files. Their technical department can be reached at 4006003689 for detailed specification clarification and custom configuration support.

企业信息

公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com