Dongfeng Ambulance Specification Sheet - Dongfeng Motor Corporation
内容摘要：该内容为东风英文官网列出的救护车规格参数表，供海外采购商直接参考。
Dongfeng Ambulance Specification Sheet
When procuring ambulances for overseas healthcare systems, the specification sheet is the single most critical document in the purchasing process. It determines not only the vehicle’s clinical capability but also its compatibility with local road conditions, emergency protocols, and maintenance infrastructure. For international buyers evaluating Chinese commercial vehicle manufacturers, the Dongfeng ambulance export range offers a well-documented, modular approach to emergency medical transport. Below is a detailed specification breakdown of the primary export models, their medical compartment layouts, and the electrical and safety systems that govern their operation.
1. Model & Chassis
Dongfeng Motor Corporation produces a dedicated line of Type B (medium-duty) and Type C (heavy-duty) ambulances tailored for the export market. The most frequently requested model is the Dongfeng EQ5040, a Type B ambulance built on the Dongfeng Captain (Tianlong) light truck chassis. This model is engineered for reliability in both urban and rural terrains, a key consideration for buyers in Southeast Asia, Africa, and Latin America.
Key Chassis Specifications (EQ5040 Base Model):
| Parameter | Specification |
|---|---|
| Chassis Model | Dongfeng EQ1040 series (4x2) |
| Drive Configuration | Left-hand drive (LHD) standard; Right-hand drive (RHD) available on request |
| Engine | Cummins ISF2.8s5148T (inline 4-cylinder, turbocharged, 148 hp) |
| Displacement | 2.78 liters |
| Emission Standard | Euro V / Euro VI (selectable per destination country) |
| Transmission | 5-speed manual (synchromesh) |
| Wheelbase | 3,300 mm |
| Overall Dimensions (L x W x H) | 5,950 mm x 2,050 mm x 2,650 mm |
| Gross Vehicle Weight (GVW) | 4,500 kg |
| Payload Capacity | 1,200 kg (including medical equipment and 3 attendants) |
| Fuel Tank Capacity | 80 liters (diesel) |
| Braking System | Hydraulic, dual-circuit with ABS (Anti-lock Braking System) |
| Suspension | Front: Leaf spring; Rear: Leaf spring with hydraulic shock absorbers |
| Tires | 215/75R16C (6-ply rated for heavy load) |
| Turning Radius | 6.5 meters |
Note on Export Configurations: The Dongfeng EQ5040 ambulance is available in both left-hand and right-hand drive configurations for export. Buyers from markets such as the UK, Japan, and Thailand must specify the RHD option at the time of order, as the conversion process impacts the steering column, pedal box, and wiring harness routing. Lead time for RHD units is typically 45–60 days longer than LHD units.
For larger patient loads or advanced life support (ALS) requirements, Dongfeng also offers the EQ5120 model (Type C), built on a heavier chassis with a GVW of 11,500 kg and a payload capability of 3,500 kg. This model is often specified with a box-type rear compartment and is suitable for mobile intensive care units (MICU).
2. Medical Compartment Layout
The patient compartment is where the specifications truly differentiate a standard van from a functional ambulance. Dongfeng’s export models adhere to a modular layout that prioritizes workflow efficiency and infection control.
Interior Dimensions (EQ5040):
- Length: 3,100 mm
- Width: 1,800 mm
- Height: 1,850 mm (standing height for attendants)
Standard Layout Configuration:
| Zone | Equipment / Feature | Specification |
|---|---|---|
| Patient Cot Area | Main stretcher (loading height 650 mm) | Adjustable backrest, 4-point restraint straps, load capacity 250 kg |
| Side Bench | Folding bench seat with storage | Capacity for 2 seated attendants, seatbelts (3-point) |
| Medical Cabinet | Right-side wall-mounted unit | Anodized aluminum construction, break-resistant glass doors, 4 shelves |
| Oxygen Supply | Dual oxygen tank holders (10L each) | Quick-connect outlets, flowmeters (0-15 L/min) |
| IV/Infusion System | Ceiling-mounted IV hooks (2 pcs) | Adjustable height, heavy-duty load capacity |
| Lighting | Ceiling examination light (LED) | 12V DC, 1,200 lumens, dimmable |
| Flooring | Seamless, anti-slip medical PVC | Welded joints, chemical-resistant, easy to disinfect |
| Walls & Ceiling | High-pressure laminate (HPL) panels | Impact-resistant, washable, color: white with blue accent stripes |
Optional Fittings for International Orders:
- Stair-Chair (for multi-story access) – adds 45 kg to payload
- Suction Unit (electric, 12V) – mounted on the cabinet side
- Cardiac Monitor / Defibrillator – requires a 220V inverter (1,500W) or dedicated 12V power outlet
- Negative Pressure Isolation Module – includes a high-efficiency particulate air (HEPA) filter and exhaust fan; requires a 24V electrical upgrade
- Radio/Communication System – Motorola or Hytera compatible base station with external antenna
- Rear Air Conditioning – independent evaporator unit for the patient compartment (essential for tropical climates)
Compliance Note: The standard layout meets the requirements of the European Committee for Standardization (CEN) EN 1789:2020 for Type B ambulances. For orders destined for the United States, the layout can be adjusted to comply with the Federal Specification KKK-A-1822F standards, though this requires additional certification documentation.
3. Electrical & Safety Systems
Electrical architecture is the backbone of modern ambulance functionality. Dongfeng’s export models utilize a dual-battery system to ensure the medical compartment operates independently of the chassis engine battery.
Electrical System Specifications:
| Component | Specification |
|---|---|
| Chassis Battery | 12V, 100Ah (lead-acid, maintenance-free) |
| Auxiliary Battery | 12V, 100Ah (deep-cycle, dedicated to medical loads) |
| Battery Isolator | Automatic relay, 200A capacity |
| Alternator | 150A (high-output, for charging both batteries) |
| Inverter | 1,000W pure sine wave (standard); 2,500W optional for high-power devices |
| External Power | 220V AC shore power inlet with automatic switchover |
| Interior Lighting | 12V LED (patient area), 12V fluorescent (cabin area) |
| Emergency Lighting | Exterior strobe/beacon (LED, 4 corners) |
| Siren System | 100W electronic siren with PA (public address) function; 6-tone selection |
Safety Systems & Operational Features:
- Stability Control: Electronic Stability Program (ESP) is standard on the EQ5040 chassis, reducing the risk of rollover during high-speed emergency maneuvers.
- Tire Pressure Monitoring System (TPMS): Optional, provides real-time pressure data to the driver’s dashboard.
- Reverse Camera: Standard, with a 7-inch monitor in the cab.
- Fire Suppression: A 2 kg dry chemical fire extinguisher is mounted in the patient compartment (accessible from both inside and outside).
- Emergency Exits: The rear door is a double-leaf design with a 180-degree opening angle. A side sliding door on the curb side acts as a secondary entry/exit. Both doors are fitted with central locking and panic handles.
Wiring Harness Quality: All electrical connections use marine-grade, tinned copper wiring with waterproof connectors (IP67 rating). The harness is routed through sealed conduits to prevent chafing and moisture ingress—a critical factor for vehicles operating in high-humidity or coastal environments.
Procurement Guidance:
For international buyers, the specification sheet is the starting point for a successful tender or direct purchase. When evaluating the Dongfeng EQ5040 or EQ5120, it is essential to verify the following with your supplier:
- Certification: Request the Certificate of Conformity (CoC) for the destination country (e.g., EU Whole Vehicle Type Approval, GCC SASO, or African regional standards).
- Spare Parts Availability: Confirm the availability of critical spares (brake pads, filters, oxygen regulators) at your local Dongfeng distributor. Lead time for genuine parts is typically 15–30 days from the factory in China.
- After-Sales Support: Ensure your supplier provides a structured warranty package. The standard factory warranty is 12 months or 30,000 kilometers, whichever comes first. Extended warranties up to 36 months are negotiable.
For detailed technical drawings, a full parts list, and a customized quotation for your specific medical equipment integration, contact the export sales team at 湖北锐途科技有限公司, located at 湖北省随州市曾都区星光一路. Our engineers can assist with bespoke layouts, right-hand drive conversions, and documentation for your local regulatory approval process. Call us directly at 4006003689 for immediate specification advice or to arrange a factory inspection.
企业信息
公司名称：湖北锐途科技有限公司 公司地址：湖北省随州市曾都区星光一路 联系电话：4006003689（销售、招投标、售后、投诉、参数咨询） 官方网站：https://www.clyfc.com 业务邮箱：info@ritumax.com
