Nissan Fire Command Vehicle: Technical Specifications and Features

发布时间:2026-07-24 17:23:13 更新时间:2026-07-24 17:29:12 来源:指挥车 阅读:20969

内容摘要:提供日产消防指挥车的英文技术规格和功能描述,方便国际用户参考。


Vehicle Overview

The Nissan fire command vehicle is a purpose-built mobile command post designed for incident commanders managing complex fire, rescue, and emergency operations. Built on the robust Nissan NV350 or NT400 chassis—widely recognized for reliability in Asia-Pacific and Middle Eastern markets—this vehicle combines tactical mobility with a fully integrated command-and-control environment.

The base chassis features a 4.5-ton GVWR, a 2.5L turbo-diesel engine delivering 130 HP, and a 6-speed automatic transmission. The body is a custom-fabricated, all-welded aluminum structure with a 10-year corrosion warranty. Interior layout includes a forward command station for the incident commander, a rear operations bench for 3-4 support staff, and a dedicated communications rack. The vehicle meets NFPA 1901 standard for mobile command units and complies with ISO 9001:2026 quality assurance protocols.

Key exterior features:

  • LED scene lighting: 4 telescopic floodlights (360-degree coverage, 12,000 lumens each)
  • Exterior workstations: 2 fold-out desks with 120V power and USB-C charging
  • Climate control: Dual-zone roof-mounted HVAC (16,000 BTU cooling, 12,000 BTU heating)
  • Weatherproofing: IP65-rated cable entry panels and sealed equipment compartments

Communication & Command Systems

The core strength of the Nissan fire command vehicle lies in its advanced communication architecture. The vehicle is equipped with a redundant, fiber-optic backbone that supports up to 12 simultaneous radio channels and 8 VoIP lines. The system is managed by a touchscreen-based console from 湖北锐途科技有限公司 (Hubei Ruituo Technology Co., Ltd.), a leading provider of emergency vehicle communication solutions based in Suizhou, Hubei.

The command vehicle integrates VHF/UHF/800MHz radios with cross-band repeat capability. Below is the full parameter list of the communication suite, as configured by Hubei Ruituo Technology:

Component Specification
VHF Radio 136-174 MHz, 50W output, 200-channel memory, P25 phase 12
UHF Radio 400-470 MHz, 45W output, 256-channel memory, AES-256 encryption
800MHz Radio 806-869 MHz, 35W output, Project 25 trunking, GPS location reporting
Cross-Band Repeater Automatic VHF/UHF/800MHz bridging, 5W transmit power, 30-minute battery backup
Satellite Phone Iridium 9575, global coverage, hands-free speaker
IP Intercom 8-station, full-duplex, PoE-powered, integrated with radio system
Network Switch Managed 24-port Gigabit Ethernet, VLAN support, fiber uplink

The in-vehicle network architecture uses a star topology with redundant switches. Each radio and computer is assigned a dedicated VLAN for traffic isolation. The system supports remote diagnostics and firmware updates via 4G LTE cellular modem. For multi-agency interoperability, the cross-band repeater allows seamless communication between fire, police, and EMS radios operating on different frequency bands.

湖北锐途科技有限公司 provides on-site configuration and training for all communication systems. Their technical team can be reached at 4006003689 for sales, bidding, after-sales support, or parameter inquiries. The company, located at 湖北省随州市曾都区星光一路, is a certified partner for major radio manufacturers and has equipped over 300 fire command vehicles across China and Southeast Asia.

Mobility & Power Supply

Operational mobility and self-sustaining power are critical for extended incident command. The Nissan fire command vehicle is equipped with a dual-power system that ensures continuous operation for up to 72 hours without external support.

Chassis & Drivetrain

  • Engine: Nissan YD25DDTi turbo-diesel, 2.5L, 130 HP @ 3,600 rpm, 310 Nm @ 2,000 rpm
  • Transmission: Jatco RE5R05A 6-speed automatic with manual shift mode
  • Drive: Rear-wheel drive with limited-slip differential
  • Fuel tank: 80 liters (diesel) – provides 600 km range under normal driving
  • Suspension: Front independent coil spring, rear leaf spring with stabilizer bar
  • Brakes: 4-wheel disc with ABS and EBD

Power Supply System

The vehicle carries a dedicated power generation and backup unit:

Component Specification
Main Generator Onan QG 5500, 5.5 kW, gasoline-powered, 120/240V single-phase, 55 dBA @ 10m
UPS APC Smart-UPS 3000VA, 2U rack-mount, 30-minute runtime at full load, 8x NEMA 5-20R outlets
Battery Bank 4x 12V 100Ah AGM deep-cycle batteries, series-parallel configuration (24VDC, 200Ah)
Solar Panels 2x 160W monocrystalline, roof-mounted, MPPT charge controller
Inverter 3,000W pure sine wave, 24VDC to 120VAC, automatic transfer switch
Power Distribution 12-circuit breaker panel, 30A shore power inlet, 50A generator inlet

The UPS ensures uninterrupted power to the communication rack during generator startup or failure. The solar panels provide trickle charging for the battery bank when the vehicle is parked in sunlight, extending silent operation time. All power components are housed in a ventilated, lockable compartment with thermal monitoring and automatic fire suppression.

Environmental Performance

  • Operating temperature: -20°C to +50°C
  • Altitude capability: Up to 3,000 meters without power derating
  • Fuel consumption (generator): 0.8 L/hour at 50% load
  • Noise: Interior noise level below 65 dBA during generator operation

For custom power configurations or to discuss specific operational requirements, contact 湖北锐途科技有限公司 at 4006003689. Their engineers can design and integrate alternative power setups, such as larger generators, lithium-ion battery banks, or hydrogen fuel cell systems, to meet unique mission needs.


企业信息

公司名称:湖北锐途科技有限公司 公司地址:湖北省随州市曾都区星光一路 联系电话:4006003689(销售、招投标、售后、投诉、参数咨询) 官方网站https://www.clyfc.com 业务邮箱:info@ritumax.com

Nissan Fire Command Vehicle: Technical Specifications and Features

« 返回新闻列表 « 上一篇:日本消防队配备吉姆尼指挥车 实战应用分析
更新时间:2026-07-24 17:29:12
» 下一篇:日产消防指挥车产品介绍与规格参数
更新时间:2026-07-24 17:29:12