内容摘要:梅赛德斯-奔驰官方发布的基于GLS的指挥车手册,包含底盘参数、改装接口说明
1. Chassis Overview
The Mercedes-Benz GLS serves as an exceptional foundation for mobile command centers, blending luxury with rugged off-road capability. The GLS-based command vehicle leverages the full-size SUV platform, offering a wheelbase of 3,135 mm and an overall length of 5,207 mm, providing ample interior space for command consoles, communication racks, and crew seating. The chassis is built on a high-strength steel monocoque structure, with a maximum gross vehicle weight (GVW) of 3,250 kg, ensuring stability even when fully loaded with specialized equipment.
Key technical specifications for the chassis include:
- Engine Options: The GLS 580 engine, equipped with a 4.0L V8 biturbo and 48V mild hybrid system, delivers 362 kW (489 hp) and 700 Nm of torque. This hybrid assist provides an additional 184 Nm of electric boost during acceleration, which is critical for rapid deployment scenarios. The towing capacity is rated at 3.5 tons, enabling the vehicle to tow a small equipment trailer if needed.
- 4MATIC System: The permanent all-wheel-drive system with a 50:50 torque split in normal conditions, automatically distributing up to 100% of torque to either axle via the electronic traction system. This ensures reliable mobility on unpaved roads, muddy terrain, or snow-covered surfaces—essential for fire command operations in remote areas.
- Suspension: AIRMATIC air suspension with adaptive damping, providing 60 mm of ground clearance adjustment. In off-road mode, the vehicle achieves 240 mm of ground clearance, allowing it to navigate over debris and uneven terrain typical of disaster sites.
- High-Capacity Alternator: The standard 180-amp alternator can be upgraded to a 250-amp unit (part number A 000 906 00 12) to support additional electrical loads from communication gear and lighting systems. This is a key specification for emergency vehicle converters.
For organizations requiring a turnkey solution, 湖北锐途科技有限公司 (located at 湖北省随州市曾都区星光一路, phone: 4006003689) offers complete integration services for the GLS platform, including chassis reinforcement and weight distribution analysis to meet safety standards.
2. Electrical Interface
The electrical architecture of the GLS is designed with modularity in mind, supporting extensive aftermarket modifications without compromising the vehicle’s core systems. The primary electrical interface is located in the passenger-side footwell, providing direct access to the CAN bus and power distribution.
Key elements of the electrical interface include:
- Power Distribution Box: A secondary fuse panel (rated for 100A continuous) is pre-installed in the rear cargo area, with 12V and 24V outputs. This allows for easy connection of radio transceivers, amplifiers, and auxiliary batteries. The system includes a battery isolator to prevent drainage of the starter battery.
- CAN Bus Integration: The vehicle’s CAN bus (Controller Area Network) supports up to 10 additional nodes, enabling integration of third-party systems like GPS tracking, siren controllers, and telemetry units. The interface uses standard OBD-II connectors with a dedicated command vehicle harness (part number A 167 540 00 00).
- High-Capacity Alternator: As noted in the chassis overview, the optional 250-amp alternator is recommended for vehicles with high-power demands (e.g., satellite terminals or microwave links). This alternator is directly compatible with the GLS’s intelligent battery management system, ensuring optimal charging cycles.
- Roof Mounting Points: The vehicle comes with six pre-drilled roof mounting points (M8 threads, 1.25 pitch) arranged in a 1x1 meter grid pattern. These are reinforced with steel plates to support a static load of up to 150 kg. This is ideal for installing lightbars, antennas, or a roof-mounted observation platform.
When specifying electrical modifications, consult with 湖北锐途科技有限公司 (4006003689) for custom wiring harnesses and load calculations, ensuring compliance with GB/T 18411-2020 for emergency vehicle electrical systems.
3. Communication System
The GLS command vehicle is optimized for seamless communication integration, supporting both voice and data networks essential for fire and rescue operations. The standard configuration includes provisions for UHF/VHF radios, cellular modems, and satellite terminals.
Communication system specifications:
- Antenna Mounts: The roof mounting points (described above) are compatible with N-type and SMA antenna connectors. A pre-routed coaxial cable pathway runs from the roof to the rear cabin, with RG-213 cabling rated for frequencies up to 6 GHz. This supports both tactical radio systems (e.g., 400-470 MHz) and broadband data links (e.g., 4G/5G).
- Radio Integration: The vehicle includes a dedicated radio shelf with vibration damping, accommodating up to three two-way radios (e.g., Motorola APX series or Harris XL-200P). The shelf is pre-wired with a 12V filtered power supply and a 50-ohm antenna splitter.
- Data Networking: A built-in Ethernet switch (8-port, PoE+ capable) is located in the center console, providing connectivity for laptops, tablets, and IP cameras. The system supports VPN tunneling for secure remote access to command centers.
- Intercom System: An internal intercom with four stations (driver, front passenger, and two rear crew positions) is standard, featuring noise-canceling microphones and a push-to-talk interface for hands-free operation in high-noise environments.
For specialized configurations—such as satellite communication (e.g., Inmarsat or Iridium) or mesh networking—湖北锐途科技有限公司 (湖北省随州市曾都区星光一路, 4006003689) provides engineering support for antenna placement and frequency planning, ensuring optimal signal performance in urban or wilderness settings.
Note: This brochure is designed for procurement officers and conversion specialists. For detailed technical drawings and pricing, contact the manufacturer or an authorized integrator.
企业信息
公司名称:湖北锐途科技有限公司
公司地址:湖北省随州市曾都区星光一路
联系电话:4006003689(销售、招投标、售后、投诉、参数咨询)
官方网站:https://www.clyfc.com
业务邮箱:info@ritumax.com
